Do I need to visit the factory during production?

August 07, 2023
Table of Contents

Planning to visit your factory in China, Vietnam or India? The key to success is to make sure that you go for the right reason, at the right time. In most cases, it’s actually better if you don’t go at all and let professionals handle it for you.

This is covered:

  • Visit your factory before starting production
  • Use a third party factory inspection service
  • There is not that much to see in the factory
  • It’s the quality inspections that really matters


1. Visit your factory before starting production

The purpose of a factory visit is to assess if they are qualified before you commit to placing an order. Visiting your supplier only after you’ve paid the upfront deposit, which is normally 30% of the total order value, may only reveal problems once it’s already too late to do something about it.

If you’re truly interested in visiting your factory, then do so at an early stage. Preferably, this should be done before you even order product samples from a certain supplier.

I also recommend that you visit more than one factory. Given the cost and time it takes to fly over here, you might as well make sure you get as much out of it as possible.

At a minimum, schedule visits with 4 to 5 suppliers.


2. Use a third party factory inspection service

You don’t actually have to fly halfway around the world yourself to check out a factory in Asia. Companies like Bureau Veritas offer factory inspection services for far less than it’ll cost you to get there.

The purpose of a factory inspection is to verify if the factory exists and benchmark their internal quality management system. Normally, the inspector will rate the supplier.

In other words, they’ll let you know if it’s a good, average or bad factory. Or, if it’s even a factory at all.

A factory inspection report also includes images and other information about the supplier.

The only drawback is that you can’t sit down with the factory management, select materials and get quotations.


3. There is not that much to see in the factory

The standard production time is normally between 30 to 50 days. However, this doesn’t mean that the factory is busy assembling your products for the entire time duration.

Instead, most of that time is actually spend waiting for the material and component suppliers to do their part. The final assembly normally only takes around a week, sometimes only a few days.

As such, arriving in the factory a week or two into the production means that there’s absolutely nothing there to see - other than ongoing production for other buyers. But that’s probably not what you’re after in the first place.

That said, you must ask these questions to your supplier if you insist on being present in their factory during production:

  • When will you start the final assembly?
  • For how many days will you assemble the products?
  • When do you estimate that production is complete?

 

Benefits

There are in fact a few benefits to being present in the factory during the later stages of production. First, you’ll verify if the supplier is actually manufacturing your products in house, or if they are subcontracting production to another factory.

Second, it can also help to detect quality issues before it’s too late to stop them.


4. It’s the quality inspections that really matters

On-site factory visits are still not a substitute or replacement for proper quality inspections. You need to get a professional quality inspector to the factory to perform product checks before shipment.

You can also send inspectors to check the products during assembly, so it’s not critical that you show up yourself.

It’s also a matter of cost. Using a service like Bureau Veritas InSpec is much less costly, compared to the cost of flights and hotels - not to mention how much time it takes.

It’s also a matter of expertise. Unless you have experience in the field of quality inspections, you’re almost always better off having a professional doing it for you.


During Production Quality Control

Quality checks can take place during production. For example, you can instruct the quality inspector to check that specific components and materials are matching your specifications before the final assembly begins. Thus, you can detect quality issues (which are in most cases caused by misunderstandings) before the final assembly.

In other words, you can catch potential problems while there’s still time to do something about it.

This is something I especially recommend when you either work with a new supplier or if a new product enters production for the first time.

Keep in mind that it’s your responsibility as a buyer to prepare a checklist for the inspector. Without that, they cannot do their job.


Pre-Shipment Inspection

The pre-shipment takes place after the products are finished, but before delivery. This quality inspection is absolutely mandatory every time you place an order.

All quality and functionality aspects must be taken into consideration during this final inspection.

Here are a few standard checklist items to include:

  • Visual inspection (e.g. marks, damages, bad polish)
  • Dimensions
  • Label check
  • Logo check
  • Full functionality testing
  • Basic functionality testing
  • Drop tests
  • Color comparison
  • Rub test
  • Water-resistance testing
  • Charging test
  • Barcode check
  • Packaging check

The inspection company can also collect a handful of product samples directly from the factory and send it to you via DHL or FedEx. As such, you can see, feel and test your product before shipment, without ever having to set foot in the factory.

Got questions about InSpec?
Talk with our specialist.
I hereby certify that I have read and I agree with the Personal Data provision of the Conditions of Service and the Cookies Policy

I hereby consent to the collection and use of the personal data I provide, with the understanding that the personal data could be used by Bureau Veritas Hong Kong Limited, its affiliates, and, where applicable, its subcontractors, for the purpose of performing the services I request.

Personal Data

1. Client’s personal data are collected by Bureau Veritas Hong Kong Limited, having its registered office at 1/F, Pacific Trade Centre, 2 Kai Hing Road, Kowloon Bay, Kowloon, Hong Kong SAR, (“BV HK”) and are subject to computer processing in order to enable Company to provide the Services. When requesting the Services, Client has been asked and has given express consent to the collection and reasonable use of Client’s personal data for purposes relevant to the Services.

2 Client’s personal data are intended for BV HK, its affiliated companies and, where applicable, subcontractors engaged in performing the Services. They will be retained for a period of time as required by the relevant local tax authorities where the Services are performed.

3 If Client’s personal data are collected in the European Union, they may be transferred outside the European Union, on the basis of standard contractual clauses established by the European Commission, and the standard contractual clauses are available on request, by clicking on this link: Contact Us .

4 In accordance with the French Data Protection Act of 6 January 1978 as amended and the General Data Protection Regulation of 27 April 2016, Client has the right to access, rectify and erase any personal data concerning Client, as well as the right to limit the processing, the right to oppose to the processing or the right to portability of your personal data. In addition, since Client has given consent to the collection and use of your personal data, Client has the right to withdraw its consent at any time. In that event, the performance of the Services may be suspended or terminated if the absence of consent renders the performance of the Services impossible or impracticable. Client also has the right to set out general and specific guidelines that define how it intends these rights to be exercised after death. Client can contact us to exercise its rights in this paragraph by clicking on this link: Contact Us Finally, Client has a right to lodge a complaint to the Commission Nationale Informatique et Liberts (CNIL).
Would you like to receive marketing communication from Bureau Veritas